Alpine CDA-7969 - Manual (Page 8)

6
-EN
Subwoofer On and Off
1
Press and hold the INTLZ button for at least 2
seconds.
2
Press the f UP button repeatedly to select
"SUB-W."
Each press of the
f UP button changes the
modes as shown:
∗
CDA-7969 Only
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3
Press the TUNE button to toggle mode between
SUB-W ON and SUB-W OFF.
If an Ai-NET compatible processor with
Subwoofer output is connected:
Press the TUNE button after selecting the SUB-W
ON mode, and the subwoofer output phase is
toggled NORMAL (0
°)
or REVERS (180
°).
4
Press and hold the INTLZ button for at least 2
seconds after setting the SUB-W ON.
5
Press the MODE button repeatedly to select the
SUB-W mode.
6
Rotate Audio Control knob until the desired
sound is obtained in each mode.
Basic Operation
INTLZ CLK
TUNE DN g f UP
Audio Control MODE
→
SUB-W
→
BALANCE
VOLUME
←
FADER
←
Changing Lighting Color
1
Press and hold the INTLZ button for at least 2 seconds.
2
Press the f UP button repeatedly to select
"AMBER".
Each press of the
f UP button changes the
modes as shown:
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
∗
CDA-7969 Only
3
Press the TUNE button to toggle the mode between
AMBER ON (amber) and AMBER OFF (green).
4
Press and hold the INTLZ button for at least 2
seconds to set the selected mode.
Dimmer Control
Set the DIMMER control to AUTO to decrease the
illumination brightness of the unit with the head
lights of the vehicle ON. This mode is useful if you
feel the unit's backlighting is too bright at night.
1
Press and hold the INTLZ button for at least 2
seconds.
2
Press the f UP button repeatedly to select
"DIM"(DIMMER).
Each press of the
f UP button scrolls the
modes as shown:
∗
CDA-7969 Only
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3
Press the TUNE button to select the Dimmer mode.
Each press toggles between DIMMER AUTO
and DIMMER MANU.
4
Press and hold the INTLZ button for at least 2
seconds to activate the normal mode.
→
AMBER
→
DIM
→
SUB-W
→
BEEP
→
MUTE
D-OUT
∗ ←
CLOSE
←
DEMO
←
AUX
←
SCR
←
→
AMBER
→
DIM
→
SUB-W
→
BEEP
→
MUTE
D-OUT
∗ ←
CLOSE
←
DEMO
←
AUX
←
SCR
←
→
AMBER
→
DIM
→
SUB-W
→
BEEP
→
MUTE
D-OUT
∗ ←
CLOSE
←
DEMO
←
AUX
←
SCR
←