Brother Innov-is 4000D 4000 - Manual (Page 4)

2
Accessories
Check that the following items are provided. If anything
is missing or damaged, contact your authorized dealer
or Brother Customer Service.
• CD-ROM (For details on the contents, refer to the
following.)
• Installation Guide (this guide)
In addition, three presser feet, which are useful for free-
motion quilting, and a bobbin cover with a scale for
stitches with a middle (center) needle position are
included with this kit.
• Free-motion quilting foot “C”
This presser foot is used to create better free-
motion sewing results with straight stitching.
Be sure to use this presser foot with the straight
stitch needle plate.
• Free-motion open toe quilting foot “O”
This presser foot is used for free-motion quilting
with a zigzag stitch or for free-motion quilting of
straight stitches on fabric with an uneven
thickness.
• Echo quilting foot “E”
This presser foot is used for free-motion quilting
1/4” or 3/8” away from lines or designs.
• Bobbin cover
The scale on this bobbin cover is a reference for
straight stitches with the needle in the middle
(center) position.
Contents of CD-ROM
• Certification Key Issuing Wizard
• Version 3.0 Upgrade Kit Operation Manual
(PDF)
* Adobe ® Reader ® or Adobe ® Acrobat ® Reader ® is required
for viewing and printing the Operation Manual.
• Upgrade application for version 3.0
• Update application for version 2.03 or later
* For the newest version of 2.03 or later, visit
www.brother.com.
Installation Overview
First, use the Certification Key Issuing Wizard on the
enclosed CD-ROM to obtain a certification key. Then,
use the certification key to install the upgrade
application for version 3.0 on the sewing machine.
In the procedures, indicates operations
performed with the sewing machine and
indicates operations performed with the computer.
[Step 1] Make a note of the machine
number (NO.).
[Step 2] Insert the CD-ROM into the
computer’s CD-ROM drive, and then
start the Certification Key Issuing
Wizard.
[Step 3] Follow the wizard directions to
obtain the certification key.
[Step 4] Install the upgrade application
for version 3.0 on the sewing machine.
[Step 5] Restart the sewing machine, and
then enter the certification key.
[Step 6] When the upgrade is finished,
the sewing machine automatically
restarts.