English – Brother PR-620 620C 600II 600IIC User Manual
Page 17
Advertising
15
ENGLISH
c
When sewing outlines of patterns, make sure
that the stitch width of the satin stitching is
at least 3 mm, and that the stitching overlaps
the fabric by at least 1.5 mm. Also, make
sure that there are no jumps of long stitches
in the outlining on each region or letter.
1
1.5 mm or more
2
3 mm or more
Note
● Do not sew more than four overlapping
layers.
1
Create the data so that overlapping areas are
not sewn.
a
b
a
Advertising
This manual is related to the following products: