ARCHOS 605 User Manual
Page 6
Making a Recording Using the Video recorder Application of your ARCHOS Device
PlEASE REFER TO THE SECTION ON MAkING A VIDEO RECORDING IN THE USER MANUAl OF YOUR ARCHOS DEVICE.
Open the Video recorder application.
Your ARCHOS device now powers the camera. On the screen, you see the image the camera is cur-
rently seeing. This preview screen thus permits you to adjust the position or direction of the camera
before you start your recording.
Settings
A number of settings such as resolution and bitrate can be adjusted. Normally you do not need to
change these settings.
Note: For information on the other settings, please refer to the section on making a video recording in the user
manual of your ARCHOS device. Please note that the parameter Format does not exist as the setting is pre-deter-
mined by the camera. For the same reason, the parameter Source can only be set to ‘Composite’ or ‘Black & White’.
•
•