Alpine TMI-M990 - Manual (Page 52)

48
- EN
Operating from the Head Unit
Operating the Head Unit with the Remote
Control
The main unit can be operated with the remote control supplied with the head unit.
•
Remote control operation list
RUE-4196
* Valid when connected with a TV unit (sold separately).
** Depending on the TV unit connected.
•
Change the switch on the back of the remote control to “TV.MONI” and operate.
Channel selection etc.
Press and hold for automatic channel selection.
Preset selection etc.
—
—
—
17
26
—
—
—
20
23
33
31
—
—
—
27
12
12
13, 40
Switch display mode
Press and hold to access/exit the REAR SELECTOR screen.
Switching the TV band
Auto memory
Press , to select the adjusting items.
Press , to adjust the item and/or change the setting.
Press and hold to turn the backlight off/on.
Switches the power of the TV Tuner ON/OFF
Accessing VISUAL EQ mode
Press and hold to access/exit the VISUAL EQ SETUP screen.
Switch V. SEL (Simultaneous Function)/In the VISUAL EQ
SETUP screen, the adjusted VISUAL EQ value is stored.
Video source, display mode, etc. indication.
Long press for auto memory ** .
Switches between stereo/MONO/SAP.
Tuning stations directly.
Display angle DOWN
Press and hold to open/close the display.
Adjusting the display back and forwards
A.PROC.
BAND
TITLE
Joystick
TOP.M/DISP
Press and hold down continuously to access/exit the SETUP
screen. MENU/SETUP
+10
AUDIO
ANGLE
SUBT.
Display angle UP
Press and hold to make the display go flat.
Press and hold to open/close the display.
Operation explanation Page
14, 40
23, 26,
34, 42
15
14, 40
*
*
*
*
*
*
*
V.SEL.
DEL.
ten key