Brother HL 5450DN - Manual (Page 28)

22
Configuring your machine for a wireless network (For HL-5470DW(T) and HL-6180DW(T))
3
m
Enter the WPA key you wrote down in step a and press OK. Go to step n. (For information on how to
enter text: uu Quick Setup Guide.)
n
To apply the settings, choose Yes. To cancel, choose No.
Do one of the following:
If you chose Yes, go to step o.
If you chose No, go back to step f.
o The machine will attempt to connect to the wireless device you have chosen.
p If your wireless device is connected successfully, the display shows Connected.
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report and refer to uu Quick Setup Guide: Troubleshooting.
(Windows ® )
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Install Printer Driver from the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Start Here OSX from the CD-ROM menu.