Brother MFC-5890CN - Manual (Page 137)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
121
12
Setting your changes as the
new default
12
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a
or b to choose Set New Default.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Restoring all settings to the
factory settings
12
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press a or b to choose
Factory Reset.
Press OK.
b
Press 1 to choose Yes.
c
Press Stop/Exit.
Scan to a memory card
or USB Flash memory
drive
12
Entering Scan mode
12
When you want to scan to a memory card or
USB Flash memory drive, press
(Scan).
The LCD shows:
Press a or b to choose Scan to Media.
Press OK.
If you are not connected to your computer
only the Scan to Media selection will appear
on the LCD.
(See Scanning for Windows
®
or Macintosh
®
in the Software User’s Guide on the CD-ROM
for details about the other menu options.)
Scan to Image Scan to Image
SCAN
Scan to OCR Scan to OCR
Scan to File
Scan to File
Scan to E-mail Scan to E-mail
Scan to Media Scan to Media
Select & Press OK
Scan a document Scan a document
directly to a media directly to a media
card or USB card or USB
flash flash
memory. memory.