Brother MFC 7360N - Manual (Page 13)

Using the control panel
5
1
c
Press a or b to choose Duplex. Press OK.
d Press a or b to choose Off, On(Long Edge) or On(Short Edge). Press OK.
e Press Stop/Exit.
Note
If the problem appears on the printout, see Improving the print quality in the Basic User's Guide.
Restoring default printer settings (For HL-2280DW and MFC-7860DW)
1
You can return the machine’s printer settings to the factory settings.
This will not reset the network settings. To reset the machine’s network settings to the factory settings, please
see the Network User's Guide.
a
Press Menu.
b
Press a or b to choose Printer. Press OK.
c Press a or b to choose Reset Printer. Press OK.
d (For MFC Models)
To restore the default settings, press 1 (Reset). Press OK.
To exit without making a change, press 2 (Exit). Press OK.
(For DCP Models)
To restore the default settings, press a or b to choose Reset. Press OK.
To exit without making a change, press a or b to choose Exit. Press OK.
e Press Stop/Exit.
Note
If you want to reset the Fax memory, see the Reset functions of Machine Information in the Basic User's
Guide.
If you want to reset the Printer memory, turn the power switch Off.