Brother MFC-8510DN - Manual (Page 23)

23
For Network Users
Web Based Management
(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
a
Open your browser.
b
Type “http://machine’s IP address/” into your
browser’s address bar (where “machine’s IP
address” is the IP address of the Brother
machine or the print server name).
 For example: http://192.168.1.2/
Print the Network Configuration
Report
You can print the Network Configuration Report to
confirm the current network settings.
a
Turn on the machine and wait until the machine
is in the Ready state.
b
Press Menu, 6, 5.
c
Press Start.
The machine will print the current network
settings.
d
Press Stop/Exit.
Restore the network settings to
the factory default
To restore all network settings of the internal
Print/Scan server to the factory default, please follow
the steps below.
a
Make sure the machine is not operating, then
disconnect all the cables from the machine
(except the power cord).
b
Press Menu, 7, 0.
c
Press 1 to choose Reset.
d
Press 1 to choose Yes.
The machine will restart, re-connect the cables
once this is complete.
Note
We recommend Windows ® Internet
Explorer ® 7.0/8.0 or Firefox ® 3.6 for Windows ®
and Safari 4.0/5.0 for Macintosh. Please also
make sure that JavaScript and cookies are
always enabled in whichever browser you use. To
use a web browser, you will need to know the IP
address of the print server. The IP address of the
print server is listed on the Network Configuration
Report.
Note
If you have configured an optional login
password, you must enter it when prompted to
access the Web Based Management.
For more information, see Web Based
Management in the Network User's Guide.