Brother DCP-120C - Manual (Page 59)

WALK-UP PHOTOCAPTURE CENTER ™ 3 - 9
Changing the default settings
You can save the PhotoCapture Center
™
settings you use most often
by setting them as default. These settings will remain until you
change them again.
Setting print quality
1
Press Menu .
2
Press or to select 2.PhotoCapture.
Press Set .
3
Press or to select 1.Print Quality.
Press Set .
4
Press or to select Normal or Photo.
Press Set .
5
Press Stop/Exit .
Setting paper and size
1
Press Menu .
2
Press or to select 2.PhotoCapture.
Press Set .
3
Press or to select 2.Paper & Size.
Press Set .
4
Press or to select Letter Glossy, 4"x 6" Glossy,
5"x 7" Glossy , A4 Glossy, Letter Plain, A4 Plain,
Letter Inkjet , A4 Inkjet or 4"x 6" Inkjet.
Press Set .
5
If you selected A4 or Letter, press or to select the print
size (4"x 3", 5"x 3.5", 6"x 4", 7"x 5", 8"x 6"or
Max. Size
).
Press Set .
6
Press Stop/Exit .