Brother PT-2300 - Manual (Page 61)

57
After you have entered your text and chosen the desired format settings, you are ready to print.
☞
If the Auto cut function is set to ON, the label will automatically be cut off after it is
printed.
To print a label:
● Press p once. The message “COPIES” followed by the number of the label being
printed is displayed.
EXAMPLE
The Feed & Cut function is used to feed out 1” (24 mm) of tape and automatically cut it off, for
example after printing with the Auto cut function set to OFF or when printing has been inter-
rupted.
To feed and cut off 1” (24 mm) of tape:
● Hold down c and press _ once. 1” (24 mm) of tape is fed out and cut off.
2 While still holding down
c
, continue pressing
Z
until ON is displayed.
3 Release
c.
To print a label and cut it off:
● Press
p
once .
O N
A U T O C U T
Caps
Alt
PRINT KEY
1 / 1
C O P I E S
Caps
Alt
FEED & CUT FUNCTION