Brother MFC 8480DN - Manual (Page 59)

Scanning
51
2
Changing the default resolution and file type
2
a For MFC models, press Menu, 5, 2, 1.
For DCP models, press Menu, 4, 2, 1.
b Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi or Color 600 dpi,
Gray 100 dpi
, Gray 200 dpi, Gray 300 dpi, B&W 200 dpi or B&W 200x100 dpi.
Press OK.
c Do one of the following:
„ For black and white file format:
Press a or b to choose PDF, Secure PDF or TIFF.
Press OK.
„ For Color or Gray file format:
Press a or b to choose PDF, Secure PDF, JPEG or XPS.
Press OK.
d
Press Stop/Exit.
Changing the default file name
2
a
For MFC models, press Menu, 5, 2, 2.
For DCP models, press Menu, 4, 2, 2.
b Enter the file name (up to 6 characters.)
Press OK.
Note
You cannot use a space for the first character.
c
Press Stop/Exit.
Understanding the Error Messages
2
Once you are familiar with the types of errors that can occur while you are using the Scan to USB, you can
easily identify and troubleshoot any problems.
„
Protected Device
This message will appear if the protect switch of the USB Flash memory drive is on.
„
Rename the File
This message will appear if there is already a file on the USB Flash memory drive with the same name as
the file you are trying to save.
„
Too Many Files
This message will appear if there are too many files stored on the USB Flash memory drive.
„
Unusable Device
This message will appear if your USB Flash memory drive is not supported by your Brother machine.