Brother HL 5450DN - Manual (Page 4)

4
CAUTION
Avoid placing your product in a high-traffic area. If you must place it in a high-traffic area, ensure
that the product is in a safe location where it cannot be accidentally knocked-over, which could
cause injury to you or others and serious damage to the product. Also ensure that cords are
secured so as not to pose a tripping hazard.
DO NOT eat the silica gel pack. Please throw away. If ingested seek medical attention
immediately.
DO NOT place heavy objects on the product. DO NOT place this product on an unstable cart,
stand, or table, particularly if children are expected to be near the product. The product is heavy
and may fall, causing injury to you or others, and serious damage to the product. For MFC and
DCP products, there is an added risk of injury if the scanner glass should break.
Important
• DO NOT put objects on top of the product. Doing so could increase the risk of overheating
should the product malfunction.
• DO NOT place your product next to devices that contain magnets or generate magnetic fields.
Doing so may interfere with the operation of the product, causing print quality problems.
• DO NOT place your product next to sources of interference, such as speakers or the base units
of non Brother cordless telephones. Doing so may interfere with the operation of the product's
electronic components.
• DO NOT connect your product to an AC power outlet controlled by wall switches or automatic
timers. Disruption of power can delete information from the product's memory.
• DO NOT connect your product to an AC power outlet on the same circuit as large appliances
or other equipment that requires a significant amount of electricity to operate. Operating this
product in conjunction with the other product(s) could create an overvoltage, tripping your
circuit breaker or blowing your fuse.