Brother HL-5050 - Manual (Page 100)

DLC PRINTING 8 - 4
YL4US_FAX2800MFC4800-FM5.5
5 A list of available print server MAC addresses (Ethernet
addresses) appears in the larger box under Card Address.
Select the address of the desired print server (you can see the
Ethernet address on the printer configuration page).
6 The selected print server address will then appear in the smaller
box under Card Address.
7 Type in any desired name for the port (the name must not be the
name of an existing port or DOS device, such as LPT1) and click
OK then on the Printer Ports screen, click Close.
8 The name you selected in the above step will appear as a
checked port in the list of available ports. Click Next.
9 Select the correct driver. Click Next.
10 Give a name to the printer. If desired, select the printer as the default.
11 Select Shared or Not Shared. If shared, specify the share
name and the operating systems that will be printing to it.
12 Select whether or not you want to print a test page, and then select
Finish.
Windows ® NT 3.5x Setup
1 From the Windows ® NT Main group, double click on the Print
Manager icon.
2 Select Printer from the menu bar and click on Create Printer.
3 Enter any desired name for the printer in the Printer Name box.
4 Select the printer model in the Driver menu.
5 Choose Other (or Network Printer for V3.1 systems) from the
Print to menu.
You can find the node name and MAC address by printing out the
printer configuration page. Refer to the Quick Setup Guide for
information on how to print the configuration page on your print
server.