Brother HL-5050 - Manual (Page 101)

8 - 5 DLC PRINTING
YL4US_FAX2800MFC4800-FM5.5
6 Click on Hewlett-Packard Network Port.
7 Type in your desired name for the port (this name must not be
an existing port or DOS device, such as LPT1).
8 The MAC addresses (Ethernet addresses) of available print
servers will appear in the Card Address menu. Select the
desired address (You can see the Ethernet address on the
printer configuration page).
9 Click OK.
10 If you want to share the printer, click Share the Printer on the
Network.
11 Click OK.
12 If necessary, select the appropriate printer options and then
click OK.
Configuring DLC on Other Systems
To use DLC on other network systems, you will generally need
vendor-supplied software. Typically such software will support the
Brother print servers. Follow the vendor's instructions to install the
DLC protocol on your system.
Once the protocol is installed, create a network port in the same way
that you did for Windows
® NT in the previous sections. The MAC
address (Ethernet address) of the print server should automatically
appear during the configuration process.
You can find the node name and MAC address by printing
out the printer configuration page. Refer to the Quick Setup
Guide for information on how to print the configuration page
on your print server.