Brother HL-5050 - Manual (Page 125)

11 - 8 TROUBLESHOOTING
YL4US_FAX2800MFC4800-FM5.5
Windows ® 95/98/Me Peer-to-Peer (HP JetAdmin
compatible method) Troubleshooting
If you are having trouble printing on a Windows ® 95/98/Me Peer-to-
Peer network, check the following (HP JetAdmin compatible
method):
1 If the print server does not show up under JetAdmin on a
Windows
® 95/98/Me Peer-to-Peer network, try removing all of
the Windows ® 95/98/Me network software from the Network
Control panel and then reinstalling them as follows:
■ First install the IPX/SPX-Compatible Protocol (or the TCP/IP
protocol if you are using a later version of JetAdmin), the
Client for Microsoft Networks, and the network adapter card
driver.
■ Install the Latest HP JetAdmin software.
■ Restart the system, and then add the HP JetAdmin service.
Windows ® 95/98/Me/NT 4.0 Peer-to-Peer
Print (NetBIOS) Troubleshooting
If you are having trouble printing on a Windows ® 95/98/Me/NT 4.0 (or
later) Peer-to-Peer network (NetBIOS), check the following:
1 Make sure that the Brother NetBIOS Port driver is securely
installed and configured according to the Windows
® 95/98/Me/
NT 4.0 Peer-to-Peer (NetBIOS) chapters. You may find that
during the installation of the port driver, the screen that prompts
you for a Port name is not displayed. This happens on some
Windows
® 95/98/Me/NT 4.0 computers. Press the ALT and TAB
keys to make it appear.
2 Make sure that the print server is configured to be in the same
workgroup or domain as the rest of your computers. It may take
several minutes for the print server to appear in the network
neighborhood.