Brother HL-5050 - Manual (Page 35)

2 - 10 TCP/IP PRINTING
YL4US_FAX2800MFC4800-FM5.5
LAN Server, OS/2 Warp Server Configuration
Brother print servers will work with IBM LAN Server, OS/2 Warp
Server networks that have IBM TCP/IP V2.0 or later installed on the
file server (TCP/IP is supplied as standard with LAN Server V4.0 and
later as well as Warp Server). Use the following procedure to
configure the print server on an LAN Server or OS/2 Warp Server file
server, or on an OS/2 Warp Connect workstation:
Server Configuration
Make sure that TCP/IP software is installed on your OS/2 file server.
If you have not already done so, open the TCP/IP folder on the
desktop, and double click on the TCP/IP Configuration icon to add
the IP address to the OS/2 file server (consult your system manager
for this address).
Refer to chapter 10 for information on how to assign an IP address
to the printer.
Configuration of an OS/2 Server
1 From the OS/2 desktop open the Templates folder. Use the
right mouse button to drag the Printer icon (not the Network
Printer icon) onto the desktop.
2 The Create a Printer window should be open (if it is not, double
click on the printer icon).
3 Type in any name for the printer.
4 Select the default printer driver. If the desired printer driver is not
listed, click on the Install new Printer Driver button and add the
driver.