Brother HL-5050 - Manual (Page 88)

APPLETALK (ETHERTALK) TCP/IP PRINTING 7 - 2
YL4US_FAX2800MFC4800-FM5.5
Quick Tips:
Macintosh Configuration (OS 8.5 - 9.2)
Your Brother Printer is compatible with the standard Apple LaserWriter
8 printer driver (earlier versions of the LaserWriter drivers may crash
or cause PostScript errors on large networks). If you do not have the
LaserWriter 8 driver you must install it. Consult your Macintosh
documentation for instructions on how to do this.
Before you try to use the Brother print server, you must first enable
the EtherTalk protocol from the Network Control Panel on the
Macintosh. If the EtherTalk protocol is not selected, or the Network
Control Panel does not exist, you must use Apple's Network
Installer software to add these capabilities.
1 The default name that will appear in the Chooser of a
Macintosh will usually be
BRN_xxxxxx_P1_AT (where
xxxxxx is the last 6 digits of the Ethernet address)
2 From a Macintosh network, the easiest way to change this name
is to assign an IP address to the printer and then use a Web
browser to change the name. Connect to the printer using a web
browser and then click on Network Configuration. Enter the
password (the default password is
access ) then select
Configure AppleTalk. Click on BRN_xxxxxx_P1_AT ,
then on Service Name. Enter the new name that you wish to
appear in Chooser. Then click on Submit.
3 System 8.6 or later supports TCP/IP printing.
4 The default password for Brother print servers is access .
5 To print a printer settings page, press the Go button three
times in rapid succession.
6 The default IP address of Brother print servers is
192.0.0.192 . To change it, use the printer control
panel, the BRAdmin application, or let your DHCP server
allocate an IP address to the printer.