Brother MFC-9130CW - Manual (Page 13)

Configuration methods
10
2
Manual configuration for a Wi-Fi Direct network
2
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network
manually.
a
Press a or b to choose Network.
Press OK.
b
Press a or b to choose Wi-Fi Direct.
Press OK.
c
Press a or b to choose Manual.
Press OK.
d
When Wi-Fi Direct On? is displayed, press a to accept.
To cancel, press b.
e The machine will show the SSID name and Password for two minutes. Go to the wireless network
settings page of your mobile device and input the SSID name and password.
f If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device,
you can download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the
Brother Solutions Center (http://solutions.brother.com/).
If the connection failed, see Troubleshooting on page 16.