Brother MFC-9130CW - Manual (Page 14)

Configuration methods
11
2
Configuring your network using Wi-Fi Direct
(For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and
MFC-9340CDW)
2
The Wi-Fi Direct network settings are configured from the control panel of the machine.
One push configuration using Wi-Fi Direct
2
If your mobile device supports Wi-Fi Direct, you can configure a Wi-Fi Direct network by following these
instructions.
a Press .
b
Press Wi-Fi Direct.
c
Swipe up or down, or press a or b to display Push Button.
Press Push Button.
d When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
e Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
Activate Wi-Fi Direct on other device. Then Press [OK].
is displayed.
Press OK on your machine. This will start the Wi-Fi Direct setup.
To cancel, press
.
f Do one of the following:
 When your Brother machine is the G/O (Group Owner), connect your mobile device to the machine
directly.
 When your Brother machine is not the G/O (Group Owner), it will display available device names with
which to configure a Wi-Fi Direct network. Choose the mobile device you want to connect to and press
OK
. You can re-search for available devices by pressing Rescan.
g
If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see Troubleshooting on page 16.