Brother MFC-9130CW User Manual
Page 17
Configuration methods
14
2
Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)
2
If your mobile device supports the PIN Method of WPS (Wi-Fi Protected Setup), you can configure a Wi-Fi
Direct network by following these instructions.
a
Press .
b
Press Wi-Fi Direct.
c
Swipe up or down, or press a or b to display Group Owner.
Press Group Owner and then press On.
d
Swipe up or down, or press a or b to display PIN Code.
Press PIN Code.
e
When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
f
When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate
your mobile device's WPS PIN configuration method (see your mobile device's user's guide for
instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct setup.
To cancel, press
.
g
The machine will wait for a connection request from your mobile device. When PIN Code appears, input
the PIN displayed on your mobile device to the machine.
Press OK.
h
If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center .
If the connection fails, see Troubleshooting on page 16.