Brother HL-3040CN - Manual (Page 18)

18
Macintosh Wired Network
For Wired Network Interface Cable Users
8 Connect the printer to
your Macintosh and
install the driver
a
Connect the network interface cable to the LAN
connector marked with a
symbol and then
connect it to a free port on your hub.
b
Make sure the printer power switch is on.
c
Turn on your Macintosh. Put the supplied CD-
ROM into your CD-ROM drive.
d
Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
e
Click Install Printer Driver on the menu
screen.
f
Click Network cable users and follow the
on-screen instructions. Then, restart your
Macintosh.
g
The Brother software will search for the Brother
printer. During this time the following screen
will appear.
h
Choose the printer you wish to connect, and
then click OK.