Brother HL-7050N - Manual (Page 87)

6 - 21 NOVELL NETWARE PRINTING
YL4US_FAX2800MFC4800-FM5.5
Assigning the Remote printer name and number using
BRCONFIG
7
a Execute the BRCONFIG from the Windows ® menu.
b Select the Brother print server from the list of print servers.
When you get the message that the print server is connected,
press the ENTER key and type the default password
access
in response to the # prompt (the password will not echo) and
then press the ENTER key again in response to the Enter
Username> prompt. When you get the Local> prompt, type:
SET NETWARE NPRINTER nlm number ON service
SET NETWARE RESCAN
EXIT
n
Where nlm is the name of the PSERVER NLM on your file
server.
n
Number is the printer number (this must match the printer
number you selected during the PCONSOLE configuration
in the previous steps).
n
Service is the name of the service assigned by NetWare
print server name(where the default services are
BRN_xxxxxx_P1 for the Brother printer, where xxxxxx is
the last six digits of the Ethernet address (MAC address)).
For example, to set up remote "Printer 3" for a Brother printer with
the print server BRN_310107_P1 using the PSERVER NLM called
BROTHER1PS, you would type:
SET NETWARE NPRINTER BROTHER1PS 3 ON BRN_310107_P1
SET NETWARE RESCAN
EXIT
n
You can also enter the remote printer name using your web
browser, by connecting to the Brother print server using the TCP/
IP protocol and selecting the NetWare protocol configuration.