Brother HL-7050N - Manual (Page 105)

8 - 6 DLC PRINTING
YL4US_FAX2800MFC4800-FM5.5
Configuring DLC on Other Systems
To use DLC on other network systems, you will generally need
vendor-supplied software. Typically such software will support the
Brother print servers. Follow the vendor's instructions to install the
DLC protocol on your system.
Once the protocol is installed, create a network port in the same way
that you did for Windows
® NT in the previous sections. The MAC
address (Ethernet address) of the print server should automatically
appear during the configuration process.
The final step is to create a printer using the normal operating system
printer setup method. The only difference is that instead of
connecting the printer to the LPT1 parallel port, you point it to the
network port you just created.
Other Sources of Information
Visit http://solutions.brother.com/ for more information on network
printing.
Brother does not recommend using the DLC protocol with
Windows
® for Workgroups 3.11 in a peer-to-peer
configuration if the printer will be heavily used. This is
because jobs may be rejected due to print spooler timeouts.
The best solution in these situations is to set up one PC as a
server for handling network print jobs. All of the other PCs
send their print jobs to the server PC using NetBEUI or TCP/
IP, and the server PC then uses DLC to send the print jobs to
the Brother print server.