Brother HL-7050N - Manual (Page 152)

TROUBLESHOOTING 13 - 16
YL4US_FAX2800MFC4800-FM5.5
13 If you can print successfully from PATHWORKS using DOS but
have problems printing from Windows
® , try increasing the
Device Not Selected and Transmission Retry timeouts from the
Windows
® Printer Manager (select Printer Setup, select the
desired printer, and press the Connect button).
Banyan VINES Troubleshooting
If you are having trouble printing with Banyan VINES, check the
following:
1 Make sure that you have the Banyan VINES PCPrint software
option installed.
2 Make sure that the Banyan protocol is enabled.
3 If there are more than two hops (i.e., more than two routers)
between the print server and the file server, make sure that you
have changed the hop count to the appropriate number via
BRAdmin or the print server console.
4 Use the VINES MUSER or MANAGE utility to verify that the print
server has logged in. If it has not, make sure that the StreetTalk
login name configured in the print server exactly matches the
login name that was configured using the MUSER or MANAGE
utility on the file server.
5 Verify that the StreetTalk name associated with the print server
service name exactly matches the name of the print queue that
was configured using the MSERVICE or MANAGE utility on the
file server.
6 Check to see that you have not exceeded the user limit on your
Banyan file server (because the print server must login as a
user), that printing is enabled on the queue, and that there are
no security restrictions on the file server that would prevent the
print server from logging in.