Brother HL-7050N - Manual (Page 56)

CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 - 3
YL4US_FAX2800MFC4800-FM5.5
Brother Internet Print
Configuring the Brother Print Server
The print server can be configured using BRAdmin, by using a web
browser, or by using the TELNET command.
Print Server Configuration Checklist
1 Configure the POP3 server on the E-mail server at the remote
site with a mail account (Mailbox name) and password for the
Brother print server (generally, the mail account name will be
the first part of the Email address; for example, if you assign the
Email address [email protected], then the mail account
name would be emailprinter).
2 Make sure that the print server is installed and running with
TCP/IP enabled and has a valid IP address assigned to it.
Because access to the E-mail server on most networks is usually
restricted, you may need to have your network administrator check
the configuration and add the mail account.
Before configuring the print server to receive BIP jobs, be
sure that the E-mail server at the remote site (the receiving
end) is configured to handle the TCP/IP POP3, and SMTP
protocols (SMTP is only required if the notification feature is
enabled).