Brother HL-7050N User Manual

Page 57

Advertising
background image

5 - 4 CONFIGURING INTERNET PRINTING FOR WINDOWS

®

YL4US_FAX2800MFC4800-FM5.5

Brother Internet Print
Using BRAdmin to Configure the Print Server

The steps required to configure the print server to receive print jobs
from a Windows

®

95/98//Me/NT4.0/2000/XP. PC running the BIP

software is as follows:

1

Start BRAdmin.

2

Select the node name of the desired Brother print server from
the list and double click on it. (the default node name is usually

BRN_xxxxxx

, where

xxxxxx

is the last six digits of the

Ethernet address (MAC address)). You will be prompted for a
password; the default password is

access

.

3

Click on the POP3/SMTP tab.

4

Enter the address of the POP3 server (consult your network
administrator if you do not know this address).

5

Enter the mailbox name for the remote Brother print server.
Usually this will be the first part of the E-mail address (for
example, if the E-mail address of the print server is

emailprinter@xyz

, then the mailbox name would be

emailprinter

).

6

Enter the password for the mailbox, if any.

Skip this section if you wish to use the print server remote
console or Web Browser to configure the print server.

Using the BRAdmin application, you can configure the
Brother print server using the TCP/IP protocol, or the IPX
protocol.

You can find the node name and MAC address by printing
out the printer configuration page. Refer to the Quick Setup
Guide for information on how to print the configuration page
on your print server.

Advertising
This manual is related to the following products: