Brother HL-7050N User Manual
Page 85
6 - 19 NOVELL NETWARE PRINTING
YL4US_FAX2800MFC4800-FM5.5
Configuring the Brother Print Server
(Remote Printer Mode) using PCONSOLE and BRCONFIG
1
Make sure that the PSERVER NLM (NetWare Loadable
Module) is loaded on your file server.
2
Log into the file server from your PC workstation as
ADMIN
if you
are using NetWare 4.1x (if you want NDS support, do not login
under bindery mode). If you are using NetWare 2.xx or 3.xx,
login as
SUPERVISOR
.
3
Run the PCONSOLE utility from your PC workstation.
4
If you are creating a new print queue, select Print Queue
Information (NetWare 3.xx) or Print Queues (NetWare 4.1x)
from the Available Options menu.
5
Press INSERT, type in the desired print queue name (with
NetWare 4.1x, you will also be asked for a volume name; press
INSERT and select the appropriate volume), and press
ESCAPE to return to the main menu.
The following steps apply to configuring a remote printer with
NDS support on NetWare 4.1x systems:
6
a
Select print servers from the PCONSOLE menu and then
select the print server name of the PSERVER NLM on your
file server.
b
Select Printers.
c
Press INSERT to get Object, Class menu.
d
Press INSERT and enter the Printer Name (any unique name
is OK).
e
Highlight the printer name and press ENTER twice to get to
the Printer Configuration Menu.
f
PCONSOLE will assign a Printer Number. Remember this
number, since it will be used later.