Brother PE-170D - Manual (Page 24)

21
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING
MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING USING A LARGE
FRAME
(OPTIONAL)
5. Insert the fabric and inner frame back into the outer frame
while ensuring that the mark on the fabric does not slip out
of position.
Correct setting
* Clamp securely so that the edges of the outer frame and
inner frame are even.
1 Outer frame
2 Inner frame
3 Fabric
6. Check to be sure that the center of the design is in the
correct location based on the crosshairs of the embroidery
sheet.
Remove the embroidery sheet using the finger hole to pull
up.
1 Finger hole for lifting