Brother QL-500 - Manual (Page 21)

21
For details on software, see the P-touch Editor Help.
6
After restarting the computer,
connect your printer to the
computer by using the USB cable,
and then turn on the printer.
• Before connecting the USB interface
cable, remove the caution label
affixed to the USB port of the
machine.
• If you are connecting the printer to
Macintosh
®
via a USB hub, it may not be detected correctly. If so, connect the
printer directly to the USB port on Macintosh
®
.
7
For Mac OS ® X 10.3.9 - 10.4.x
Double click the drive where Mac OS
®
X is installed, and click in order of
[Applications] - [Utilities] - [Printer Setup Utility].
For Mac OS
®
X 10.5.x-10.6
Click in order of [Apple menu] - [System Preferences], and click [Print & Fax].
8
For Mac OS ® X 10.3.9 - 10.4.x
Click [Add] and choose USB at the top of the screen.
Choose "QL-XXX" from the list and click [Add] again to add the printer to the
"Printer List".
For Mac OS ® X 10.5.x - 10.6
Choose "QL-XXX" from the list and click [Add] / to add the printer to the "Printer
List" / "Print & Fax".
9
When the screen returns to [Printer List / Print & Fax] screen, check that
"QL-XXX" is added, and close the [Printer List / Print & Fax] screen.
Now you can use the machine.
USB cable
Power cord
USB port
Power port