Brother DCP-165C - Manual (Page 80)

68
e
Close the Jam Clear Cover.
Make sure the cover is closed properly.
f
Lift the scanner cover (1) from the front
of the machine until it locks securely into
the open position.
Make sure that there is no jammed
paper left in the corners of the machine
under the plastic covers.
Note
• If the paper is jammed uder the print head,
unplug the machine from the power
source, and then move the print head to
take out the paper.
• If the print head is at the right corner as
shown in the illustration, you cannot move
the print head. Press Stop/Exit until the
print head moves to the middle. Then
unplug the machine from the power
source, and take out the paper.
• If ink gets onto your skin, immediately
wash it off with soap or detergent.
g
Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3).
1
1
2 3