Brother PT-9800PCN - Manual (Page 19)

Configuring your network printer
14
2
a Type http://printer_ip_address/ into your browser. (Where printer_ip_address is the IP
address or the print server name)
„ For example:
http://192.168.1.2/ (if the printer’s IP address is 192.168.1.2.)
Note
If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter
the DNS name of the print server. As the print server supports TCP/IP and NetBIOS, you can also enter
the NetBIOS name of the print server. The NetBIOS name can be seen on the printer settings page. The
NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as
“BRNxxxxxxxxxxxx” where “xxxxxxxxxxxx” is the Ethernet address.
b
Click Network Configuration.
c
Enter a user name and a password. The User Name is admin and the default Password is access.
d Click OK.
e
You can now change the print server settings.
Printing the Printer Settings
2
The Printer Settings Page prints a report listing the network settings. You can print the Printer Settings Page
using the Feed/Cut button of the printer.
Note
The node name and Ethernet address in addition to its detailed information are printed in the printer
settings list.
<Node name> BRNxxxxxxxxxxxx
<Ethernet Address> xxxxxxxxxxxx
The default Node name of the network card in the printer is “BRNxxxxxxxxxxxx” where “xxxxxxxxxxxx” is
the Ethernet address.
How to print the Printer Settings Page
2
a Make sure that the HG or TZ tape cassette is set and the tape compartment cover is closed.
To print the Printer Settings Page, we recommend to use the tape wider than 1” (24mm).
b Turn on the printer.
c Press and hold the Feed/Cut button.
Note
• To reset network setting and turn APIPA ON
Press the Power button to switch the machine OFF. Then, hold down the Power button for two seconds.
Continue holding down the ON/OFF button, and press the Feed/Cut button twice. All the network settings
will be reset.
• To reset network setting and turn APIPA OFF
Press the Power button to switch the machine OFF. Then, hold down the Power button for two seconds.
Continue holding down the ON/OFF button, and press the Feed/Cut button four times. All the network
settings will be reset.