Brother PT-9600 - Manual

PT-
Software Installation Guide
Printed in China
LW5743001
English
Features
CD-ROM Precautions
• Do not scratch the CD-ROM.
• Do not subject the CD-ROM to extremely high or extremely low temperatures.
• Do not put heavy objects on the CD-ROM or apply force to the CD-ROM.
• The software contained on the CD-ROM is meant for use with your
purchased machine only.
It may be installed on multiple PCs for use at an office, etc.
Before installation, check that your system configuration meets the following
requirements.
Introduction
P-touch Editor Makes it easy for anyone to create a wide variety
of custom labels in complex layouts by using fonts,
templates, and clip art.
Printer Driver Lets you transfer label designs and graphics to the connected
P-touch labeller when using P-touch Editor on your PC.
System Requirements
OS Windows ® Microsoft ® Windows ® XP / Windows Vista ® /
Windows ® 7
Macintosh ® Mac OS ® X 10.3.9 - 10.6
Hard disk Windows ® Disk space more than 70 MB
Macintosh ® Disk space more than 100 MB
Memory Windows ® Windows ® XP: More than 128 MB
Windows Vista ® : More than 512 MB
Windows ® 7: More than 1 GB (32-bit) or
2 GB (64-bit)
Macintosh ® Mac OS ® X 10.3.9: More than 128 MB
Mac OS ® X 10.4.x: More than 256 MB
Mac OS ® X 10.5.x: More than 512 MB
Mac OS ® X 10.6: More than 1 GB
Monitor Windows ® SVGA, high colour or higher graphics card
Macintosh ® More than 256 colours
Others CD-ROM drive
Microsoft, Windows and Windows Vista are registered trademarks
of Microsoft Corporation, USA.
Apple, Macintosh and Mac OS are trademarks of Apple Inc.,
registered in the United States and other countries.
The names of other software or products used in this document
are trademarks or registered trademarks of the respective
companies that developed them.
Installing the P-touch Editor and
Printer Driver
The procedure for installing the software varies depending on the OS of the
computer. Installation procedure is subject to change without notice.
The printer names in the following screens may differ from your purchased
printer name.
Start the computer and put the CD-ROM into the CD-ROM drive.
Select the desired language, and click the type of setup you prefer.
Standard:
All features (P-touch Editor and the Printer driver) will be installed
(default).
Custom:
You can specify which features to install. Recommended for advanced
users.
Display User's Guide:
Software User's Guide (PDF) (PDF reader software required).
Adobe Reader Download:
Link to the download page for Adobe ® Reader ® will be displayed.
Read the license agreement carefully. If you agree with the terms and
conditions of the license agreement, click [Yes] to continue the
installation.
Follow the on-screen instructions.
Select the Microsoft ® Office application(s) you would like to use the
Add-In functions with, and click [Next].
(The Add-In function will let you create labels directly from your
Microsoft ® Office applications.)
Follow the on-screen instructions.
Select the desired model, and then click [OK].
Follow the on-screen instructions of the driver installation.
• Do not connect the printer to the computer until directed to do so.
• The installation procedure may change depending on the
Operating System on your PC. Windows Vista ® is shown here as
an example.
• For details of the software, see the "Software User's Guide" (PDF).
• You can find the "Software User's Guide" (PDF) by clicking [Start] -
[All Programs] - [Brother P-touch] - [Manuals] - [P-touch] - [Software
User's Guide].
XFor Windows ® XP
Although a message warning that no
digital signature was found appears
soon after driver installation begins,
it is safe to click [Continue Anyway].
XFor Windows Vista ® / Windows ® 7
When the message confirming
installation of software published
by Brother appears, click [Install].
For some models this screen may not appear.
When instructed, connect your printer to the computer by using the
USB cable, and then turn on the printer.
Once the printer is detected, the driver will automatically be installed.
When instructed to register your printer online, select a registration
method and click [Next]. If you have selected to register the product
online, your default internet browser will be launched in a new
window. Follow the instructions to register your printer.
Click [Finish]. The software installation is now complete. Restart your
computer if you are instructed to do so.
Start the software. Click [Start] - [All Programs] - [Brother P-touch] -
[P-touch Editor 5.0] to start P-touch Editor 5.0.
The uninstall procedure for P-touch Editor differs depending on the operating
system being used.
Please read "PT-XXXX" as your printer name in the following steps.
Uninstalling P-touch Editor
XFor Windows ® XP
From [Control Panel], go to [Add or Remove Programs].
The [Add or Remove Programs] dialog box appears.
XFor Windows Vista
® / Windows ® 7
From [Control Panel], go to [Programs] and open [Programs and
Features].
The [Uninstall or change a program] dialog box appears.
Choose "Brother P-touch Editor 5.0", and click [Remove (XP) /
Uninstall (Windows Vista
® / Windows ® 7)].
Click [OK].
The uninstall operation starts. After the software is removed from your
computer, the [Maintenance Complete] dialog box appears.
Close the [Add or Remove Programs (XP) / Programs and Features
(Windows Vista ® / Windows ® 7)] dialog box.
P-touch Editor has been uninstalled.
Uninstalling the Printer Driver
Turn off the printer.
XFor Windows ® XP
Click the "Start" button, go to [Printers and Faxes] window.
XFor Windows Vista
®
From [Control Panel], go to [Hardware and Sound] and open [Printers].
XFor Windows
® 7
Click , go to [Devices and Printers].
XFor Windows ® XP
• The printer is detected, and then
the "Found New Hardware Wizard"
starts up. Select [No, not this time],
and then click [Next]. In the dialog
box for selecting the installation
method, select "Install the software
automatically (Recommended)",
and then click [Next].
• Again, a message appears warning
that no digital signature was found.
Click [Continue Anyway] to install
the printer driver. When a message
appears, indicating that the printer
has been added, click [OK] to close
the message.
For some models this screen may not appear.
For details, see Windows ® Help.
10
XFor Windows ® XP
Choose "Brother PT-XXXX", and click [File] - [Delete].
XFor Windows Vista
® / Windows ® 7
Choose "Brother PT-XXXX", right click on the icon, and then click
[Delete] (Windows Vista ® ) / [Remove device] (Windows ® 7).
XFor Windows ® XP
Go to [File] - [Server Properties].
XFor Windows Vista
®
In the [Printers] window, right click and go to [Run as administrator] -
[Server Properties...].
If the authorization confirmation dialog appears, click [Continue]. If the
[User Account Control] dialog box appears, enter the password and
click [OK].
XFor Windows
® 7
Choose [Fax] or [Microsoft XPS Document Writer] in the [Devices and
Printers] window, and then click [Print server properties], which
appears in the menu bar.
XFor Windows
® XP
Click the [Drivers] tab and choose "Brother PT-XXXX". Then, click
[Remove].
XFor Windows Vista
®
Click the [Drivers] tab and choose "Brother PT-XXXX". Then, click
[Remove...].
XFor Windows
® 7
Click the [Drivers] tab, and then click [Change Driver Settings].
(If a User Account Control message appears, type in the password,
and then click [OK].)
Choose "Brother PT-XXXX", and then click [Remove...].
XFor Windows ® XP
Now, go to step 7.
XFor Windows Vista
® / Windows ® 7
Choose [Remove driver and driver package] and click [OK].
Follow the on-screen instructions.
Close the [Print Server Properties] window.
The printer driver has been uninstalled.
Starting P-touch Editor Help
Detailed instructions to create labels with the software is described in Help.
The printer names in the following screens may differ from your purchased
printer name.
Starting from Start button
Click [Start] - [All Programs] - [Brother P-touch] - [P-touch Editor 5.0].
In the [New/Open] dialog box, click [Help - How To].
Installing the Software and
Printer Driver
Uninstalling the Software
and Printer Driver
How To Use the P-touch
Editor Help
For Windows
Installing the P-touch Editor and
Printer Driver
The procedure for installing the software varies depending on the OS of the
computer. Installation procedure is subject to change without notice.
Please read "PT-XXXX" as your printer name in the following steps. The
printer names in the following screens may differ from your purchased printer
name.
Below is the example for Mac OS ® X 10.5.7.
Start up the Macintosh ® , and insert the CD-ROM into the CD-ROM drive.
Double-click the "PT-Series" (CD-ROM) icon.
Double-click "Brother PT-XXXX Driver.pkg" in the "Mac OS X" folder.
The Driver Installer starts up. Follow the on-screen instructions.
After the installation is completed and the screen shown below is
displayed, click [Close].
The installation of the printer driver is completed.
Next, install P-touch Editor 5.0.
Double-click "P-touch Editor 5.0 Installer.mpkg".
The P-touch Editor 5.0 Installer starts up.
Follow the on-screen instructions.
When the installation is completed and the message "Click Restart to
finish installing the software." is displayed, click [Restart].
The Macintosh
® is restarted.
The installation of software is completed.
After restarting the Macintosh ® , connect your printer to the
Macintosh ® by using the USB cable, and then turn on the printer.
XFor Mac OS ® X 10.3.9 - 10.4.x
Double-click the drive where Mac OS ® X is installed, and click
[Applications] - [Utilities] - [Printer Setup Utility].
XFor Mac OS ® X 10.5.x - 10.6
Click Apple menu - [System Preferences], and click [Print & Fax].
• Do not connect the printer to your Macintosh ® before P-touch
Editor 5.0 installation has been completed.
• You must be logged on as a user with administrator privileges to
install this software.
• Turn off the printer with the power button and then with the main
power switch.
If you are connecting the printer to the Macintosh ® via a USB hub, it
may not be detected correctly. If so, connect the printer directly to the
USB port on the Macintosh
® .
For Macintosh
Installing the Software and
Printer Driver
XFor Mac OS ® X 10.3.9 - 10.4.x
Click [Add] and choose USB at the top of the screen.
Choose [PT-XXXX] from the list and click [Add] again to add the
printer to the [Printer List].
XFor Mac OS ® X 10.5.x - 10.6
Choose [Brother PT-XXXX] from the list and click [Add] / to add
the printer to the [Printer List] / [Print & Fax].
When the screen returns to the [Printer List] / [Print & Fax] screen,
check that the [PT-XXXX / Brother PT-XXXX] is added, and close the
[Printer List] / [Print & Fax] screen.
Now you can use the printer.
The uninstall procedure for P-touch Editor differs depending on the operating
system being used.
Please read "PT-XXXX" as your printer name in the following steps.
Uninstalling P-touch Editor
On the drive where P-touch Editor is installed, double-click the
"Applications" folder - "P-touch Editor 5.0" folder - "Uninstall P-touch"
folder - "UninstallPtEditor.command".
The "Terminal" window appears, and the uninstall operation starts.
Click to close the [Terminal] window.
Delete the "P-touch Editor 5.0" folder from the "Applications" folder.
P-touch Editor has been uninstalled.
Uninstalling the Printer Driver
Turn off the printer.
XFor Mac OS ® X 10.3.9 - 10.4.x
Double-click the drive where Mac OS ® X is installed, and click
[Applications] - [Utilities] - [Printer Setup Utility].
The [Printer List] window appears.
XFor Mac OS ® X 10.5.x - 10.6
Click Apple menu - [System Preferences], and click [Print & Fax].
XFor Mac OS ® X 10.3.9 - 10.4.x
Choose "PT-XXXX", and click .
XFor Mac OS ® X 10.5.x - 10.6
Choose "Brother PT-XXXX", and click .
Close the [Printer List] / [Print & Fax] window.
The printer driver has been uninstalled.
Starting P-touch Editor Help
The following is the example for Mac ® X 10.4.9. The printer names in the fol-
lowing screens may differ from your printer name.
Start from New/Open dialog box
In the New/Open dialog box, click [Help - How To.]
Start from P-touch Editor
To start the P-touch Editor Help, click the Help menu and choose
[P-touch Editor Help].
• Administrator privileges are required for the uninstall operation.
• In case the [Terminal] window does not appear by double-clicking
the "UninstallPtEditor.command", right click (or press control key
+ click) the "UninstallPtEditor.command". The context menu
appears. Open the [Terminal] window from the context menu.
Before you delete the "P-touch Editor 5.0" folder, please check if any
necessary files are saved in it.
Uninstalling the Software
and Printer Driver
How To Use the P-touch
Editor Help