Brother HL-1670N - Manual (Page 2)

Reprint
Data
Go
Job cancel
Back
Set
OFF ON
O I
OFF ON
O I
OFF ON
O I
OFF ON
O I
Follow the instructions for your interface cable and operating system.
5 Turn the printer power
switch on. 3 Turn the printer power switch off. 4 Connect the interface cable to your PC, and
then connect it to the printer. 6 Click the Next button. 7 Click the Finish button.
The setup is now complete.
For
Parallel
interface cable users (For
Windows ®
users only)
3 Connect the USB interface cable to your Macintosh ® , and
then connect it to the printer.
2 Make sure the printer power switch
is on. 1 Double-click the Printer Driver Installer icon, and
then follow the instructions on the screen.
4 Open the Chooser from the Apple ® menu on the
Macintosh ® .
If you want to connect your printer using a Network cable, refer to the Quick Network Setup Guide.
After the administrator has made the required settings, install the driver referring to the "Installing the
Driver for Network users" section of the Quick Network Setup Guide.
For HL-1650 user: Install the optional Network board (NC-4100h) referring to Chapter 4 of the
printer.
Step 5 Install the Driver & Connect the Printer to your Macintosh ® Step 5 Install the driver & Connect the printer to your PC
Step 6 Setting your PC printer port (For Windows ® 2000 users only)
Step 5 Connect the printer to your PC & Install the printer driver
5 Click the HL-1650/1670N icon and select it.
The setup is now complete.
For
USB
interface cable users (For
Macintosh ®
users only)
For
Network
users
Control Panel Data LED : Orange
Switches
Language Setting (Default setting is English)
4 Click the OK button.
Note: When the "Add New Hardware
Wizard" appears on your PC, click the
Cancel button.
Note: Start installing the driver before
you connect the USB interface cable to
the printer. If you have already
connected it, remove it.
Note: If "Add New Hardware Wizard"
appears, click the Cancel button.
1 After your PC has restarted, click Start,
Setting and Printers. 2 Select the Brother HL-1650/1670N
series (copy2) icon. 3 Click on the File menu, and then
select Set as Default printer.
The setup is now complete.
5 Make sure the printer power switch is
on. 6 Connect the USB interface cable to your PC, and then
connect it to the printer.
For Windows ® 98/Me users: The setup is now complete.
For Windows ® 2000 users: Go to Step 6.
For
USB
interface cable users (For
Windows ®
users only)
On
Blinking
Off
For more information, see Chapter
3 "CONTROL PANEL" in the User's
Guide.
Data remains in the printer buffer.
Receiving or processing data.
No remaining data.
Exit from the control panel menu, reprint settings and clear error messages.
Pause / Continue printing.
Stop and cancel the printer operation in progress.
Select the reprint menu.
Move forward and backward through menus.
Move forward and backward through selectable options.
Select the control panel menu.
Set the selected menus and the settings.
Go back one level in the menu structure.
1. Select the SETUP mode by pressing the + switch, and press the Set switch.
2. Check that the LANGUAGE message appears, and press the Set switch.
3. Choose your language by pressing the
+ or - switch, and press the Set switch. An asterisk mark ( * )
appears at the end of the display.
(You can return to the READY status by pressing the Go switch.)
Set
Back
Go
Job Cancel
Reprint
Menu
1 Click "Connect the interface
cable and install the printer
driver / utilities". 2 Select the USB cable. 3 Click the Next button.
1 Click "Connect the interface cable and
install the printer driver / utilities". 2 Select the parallel interface
cable.