Brother HL-4040CDN - Manual (Page 35)

Printing Methods
26
2
Printing photos from a digital camera
2
Your Brother printer supports the PictBridge standard, allowing you to connect to and print photos directly
from any PictBridge compatible digital camera. Even if your camera is not in PictBridge mode or does not
support PictBridge, you can still print photos from a digital camera in Mass storage mode. See Connecting a
camera as a storage device on page 28.
PictBridge requirements
2
The machine and the digital camera must be connected using a suitable USB cable.
The image file must be taken with the digital camera you want to connect to the printer.
Setting your digital camera
2
Make sure your camera is in PictBridge mode. The following PictBridge settings may be available from the
LCD of your PictBridge compatible camera. Depending on your camera some of these setting may not be
available.
Copies
Qualities
Paper Size
Date Print
File Name Print
Layout
You can also set the following PictBridge settings by using the control panel.
1
These menu selections are also set by your camera. Camera settings are prioritized as long as your camera is not set to use the Printer Settings
(Default settings).
Menu Submenu Options
PictBridge
Paper Size
1
Letter*/ A4 / B5 / A5 / B6 / A6 See
PictBridge on page 87
Orientation
Portrait* / Landscape
Date & Time
1
Off* /On
File Name
1
Off* / On
Print Quality
1
Normal* / Fine
Paper Tray Tray Use
Auto*/ MP Only / Tray1 Only / Tray2 Only See Paper
Tray on page 79
Duplex (HL-4040CDN/
HL-4050CDN/
HL-4070CDW only)
Off*/ On (Long Bind) / On(Short Bind)