Brother PE-700II 750DUSB - Manual (Page 7)

5
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Engl
ish
Upgrading Your Machine’s Software
You can use a computer to download software upgrades for your sewing machine.
Visit our website at www.brother.com for notification of available updates.
Note
z There may be multiple upgrade files. Be sure to download all files in the correct order.
z If an upgrade file for a different model is downloaded from the Brother Web site, the machine may not
operate correctly. Therefore, download the upgrade file for this model again.
Memo
z While the software is being upgraded, the buzzer will not sound when a key is pressed.
a
While holding (Settings key) pressed,
turn on the machine.
X The following screen appears.
b
Plug the USB cable connectors into the
corresponding USB ports on the computer and
on the machine.
X The “Removable Disk” icon appears in “My
Computer” on the computer.
c
Copy the first upgrade file to “Removable
Disk”.
X The message “Connected to PC. Do not
disconnect the USB cable.” appears.
d
When the screen shown in step
a
appears
again, press .
X The message “Saving the upgrade file. Do
not turn main power to OFF.” appears.
e
When the following screen appears, the first
upgrade file is downloaded.
f
Copy the second upgrade file to “Removable
Disk”.
g
When the screen shown in step
e
appears
again, press .
X The message “Saving the upgrade file. Do
not turn main power to OFF.” appears.
h
When the following screen appears, upgrading
is completed.
Note
z If an error occurred, an error message
appears. At this time, turn the machine off,
and then start the procedure again from step
a
.
i
Disconnect the USB cable, and turn the
machine off, then on again.