Brother CS-6000i User Manual

Page 49

Advertising
background image

47

3

c

Select stitch

.

d

Position the fabric so that the opening of the
pocket faces toward you, and then lower the
presser foot lever so that the needle drops
2 mm (1/16 inch) in front of the pocket
opening.

a 2 mm (1/16 inch)

Pass the upper thread down through the hole
in the presser foot.
• When lowering the presser foot, do not push

in the front of the presser foot, otherwise the
bar tack will not be sewn with the correct
size.

a Do not reduce the gap.

e

Pull down the buttonhole lever as far as
possible.

a Buttonhole lever

The buttonhole lever is positioned behind the
bracket on the buttonhole foot.

a Buttonhole lever
b Bracket

f

Gently hold the end of the upper thread in
your left hand, and then start sewing.

X

Once sewing is completed, the
machine automatically sews
reinforcement stitches, then stops.

g

Raise the presser foot lever, remove the
fabric, and cut the thread.

h

Raise the buttonhole lever to its original
position.

Memo

● If the fabric does not feed, for example,

because it is too thick, increase the stitch
length. For details, refer to “Selecting
stitching” (page 27).

1

Advertising
This manual is related to the following products: