Brother HL-2600CN - Manual

Power
Alarm
Secure Print
Reprint Back Set
Data
HL-2600CN
Job Cancel Cancel
Ready Ready
Go Go
NETWORK READY NETWORK READY
K C M Y
Power
Alarm
Secure Print
Reprint Back Set
Data
HL-2600CN
Job Cancel
Ready Ready
Go
NETWORK READY NETWORK READY
K C M Y
C
M
Y
K K
Y
M
C
Step 1 Install the Oil Bottle and the Fuser Cleaner
Step 2 Install the OPC Belt Cartridge
Step 3 Install the Toner Cartridges
Step 4 Load Paper in the Paper Tray
Step 5 Print a Test Page
Quick Setup Guide
Color Laser Printer HL-2600CN series
Continue to the Windows ® Driver Installation Guide or Macintosh ® Driver Installation Guide.
1 Rock the toner cartridge 3
to 4 times. 2 Pull off the tape labeled 'REMOVE,' and
then remove the orange protective cover. 3 Install the toner cartridge by sliding it into the correct guide.
Match the cartridge color label to the corresponding label
on the printer. 4 Repeat Steps 1 through 3 for the
remaining toner cartridges.
5 Close the front cover.
2 Pull the paper tray completely out of the
printer. 3 Adjust the paper guides to fit the size of paper you want to load.
Load paper in the paper tray. 4 Re-install the paper tray in the printer.
1 Make sure the printer power button is off.
Do NOT connect the interface cable. 2 Connect the AC power cord to the
printer, and then plug it into the AC
outlet. 3 Turn on the
power button. 4 After the printer warms, the READY message
will appear. 5 Press the Go button. The printer will print a test page.
Check that the test page is printed correctly.
Note: When you want to change the language of the control panel masssage, refer to "Setting Your Language on the Control Panel" on the reverse.
1 Remove the protective part.
1 Remove the protective parts.
Open the top cover. 2 Move the fusing unit pressure
release levers to the SET position. 3 Install the oil bottle in the fusing unit with the
label side facing you. 4 Insert the fuser cleaner into the fusing
unit with the roller side facing you. 5 Lock both oil bottle lock levers.
1 Open the front cover. 2 Release both belt cartridge lock
levers. 3 Remove the orange belt tension release pins from
both sides of the OPC belt cartridge.
Remove the protective sheet.
Note: Please be careful not to touch the green surface of the OPC belt or expose it to light for any length of time.
5 Lock the belt cartridge lock levers.
Close the top cover.
Setting Up the Printer
Carton Components
Carton components may differ from one country to another.
Save all packing materials and the printer carton. They should be used when shipping the printer.
Printer
Toner cartridges (Black, Cyan, Magenta and Yellow)
AC power cord Quick Setup Guide Windows ®
Driver Installation Guide
Macintosh ®
Driver Installation Guide
Read the "Safety Sheet" first to ensure that you use this printer safely.
Read this "Quick Setup Guide" before you set up the printer.
Before you can use the printer, you must set up the hardware and install the driver.
Identify the operating system on your computer (Windows
® 95 / 98 / Me,
Windows NT ® 4.0, Windows ® 2000 / XP or Macintosh ® ).
The interface cable is not a standard accessory. Please purchase the appropriate
interface cable for the interface you intend to use (Parallel, USB or Network).
Most existing parallel cables support bi-directional communication, but some might
have an incompatible pin assignment or may not be IEEE 1284 compliant.
If you are an Administrator: Configure your network printer settings referring to the
reverse side of this sheet.
Top Cover
Protective Parts
Protective Part
Front Cover
'REMOVE' Tape Toner Cartridge Protective Cover
Paper Tray
Paper Guide
Paper Guide
Control Panel
Unfold the Tray
Extention Flap
Oil Bottle Fuser Cleaner
LJ3746001 Printed in Japan
4 Insert the OPC belt cartridge into the
printer guides with the flat side facing
you.
OPC belt cartridge Fuser cleaner Oil bottle Oil syringe
Fusing Unit
Pressure Release
Lever
Oil Bottle Lock Lever
You can Find a Variety of Information on this CD-ROM.
Install Software
Install the printer driver and utilities.
(Mac OS X is not supported by Install
Software).
Maintenance Tutorial
Instructional movie for printer maintenance.
Manual
View the User's Guide and Network User's
Guide in PDF format. (Viewer included)
Color PDF Print Samples
View color samples of printouts from an
HL-2600CN in PDF format.
Learn More
Watch instructional movies to learn about
our unique software features.
Brother Solutions Center
The Brother Solutions Center
(http://solutions.brother.com) is your one-
stop resource for all your printer needs.
Download the latest drivers and utilities for
your printers, read the FAQs and
troubleshooting tips or learn about special
print solutions.
Windows ®
Macintosh ®
What is Included on the CD-ROM
Belt Tension
Release Pin
Color Labels
Protective Sheet
OPC Belt
Cartridge
Printer Guides
CD-ROM
(including User's
Guide)
Fusing Unit
Belt Cartridge
Lock Levers