Brother PT-2410 - Manual (Page 121)

117
<Service Center Locations>
* If you need a local service center, please call 1-800-284-HELP (4357) to locate the autho-
rized service center closest to you.
<Operational Assistance>
* For technical and operational assistance, you may call Brother Customer Service at:
1-877-4-P-TOUCH (voice), or 1-901-379-1210 (fax).
SET 1/4”
TAPE!
SET 6mm
TAPE!
• This message appears if a
1/4” (6-mm)-wide tape cas-
sette is not installed when a
layout for 1/4” (6-mm)-wide
tape is selected.
• Install a 1/4” (6-mm)-wide
tape cassette.
SYSTEM
ERROR! • This message appears if there
is a problem with the
machine’s software.
• Contact your service repre-
sentative.
TAB
LIMIT! • This message appears if 50
tabs have already been added
to the text when you hold
down and press .
• Limit the number of tabs in
the text to 50.
TEXT
TOO HIGH! • This message appears if the
size of the text is larger than
the width of the installed
tape.
• Reduce the size of the char-
acters or install a wider tape.
TEXT
TOO LONG! • This message appears if the
length of the text is longer
than the label length that has
been set using the Length
function.
• Delete some of the text,
reduce the character width,
or increase the set label
length.
• This message appears if you
try to enter text that is longer
than the preset length of a
layout field of the Auto for-
mat function.
• Delete some of the text.
Error Message Cause Solution
Code Code
Tab
Q
Tab
Q