Brother HL 2270DW - Manual (Page 32)

Driver and Software
28
2
 Print cut-out line
When 1 in NxN pages option is selected, the Print cut-out line option can be selected. This option allows
you to print a faint cut-out line around the printable area.
Duplex / Booklet
2
When you want to print a booklet or do duplex printing, use this function.
 None
Disable duplex printing.
 Duplex / Duplex (Manual)
When you want to do duplex printing, use these options.
• Duplex (HL-2240D / HL-2242D / HL-2250DN / HL-2270DW / HL-2275DW only)
The machine prints on both sides of the paper automatically.
• Duplex (Manual)
The machine prints all the even numbered pages first. Then the printer driver will stop and show the
instructions required to re-install the paper. When you click OK the odd numbered pages will be printed.
When you choose Duplex or Duplex (Manual), the Duplex Settings... button becomes available to
choose. You can set following settings in the Duplex Settings dialog box.
• Duplex Type
There are four types of duplex binding direction available for each orientation.
• Binding Offset
When you check Binding Offset, you can also specify the offset for binding in inches or millimeters.
Portrait
Long Edge (Left)
Long Edge (Right) Short Edge (Top) Short Edge (Bottom)
Landscape
Long Edge (Top)
Long Edge (Bottom) Short Edge (Left) Short Edge (Right)