Brother HL 2270DW - Manual (Page 80)

Routine Maintenance
76
4
The printing operation varies depending on the machine setting:
 Default setting (Stop mode)
The machine will stop printing until you replace the toner cartridge with a new one when the LEDs indicate
REPLACE TONER.
 Continue mode
To force the machine to continue printing after the LEDs indicate REPLACE TONER, press Go seven
times to enter Continue mode (all the LEDs flash twice, and then the Ready LED turns on). The machine
will continue printing until the LEDs indicate TONER ENDED.
To return to the default setting (Stop mode), press Go seven times (all the LEDs flash once).
Note
• Make sure that the front cover is closed before you change the mode.
• When the LEDs indicate an error mode, you cannot change the mode.
• If you continue printing in the Continue mode, we cannot guarantee the print quality.
• While using Continue mode the print may appear faint.
 Ready mode
When you replace the toner cartridge with a new one, the machine returns to Ready mode.
TONER ENDED
4
The machine stops printing until you replace the toner cartridge with a new one. See Replacing the toner
cartridge on page 71.