Brother MFC 9970CDW - Manual (Page 15)

Configuring your machine for a wireless network (For MFC-9560CDW and MFC-9970CDW)
10
3
Step by step chart for wireless network configuration
3
For Infrastructure mode
3
a
Confirm your network environment. See page 12.
b
Confirm your wireless network setup method. See page 13.
c
Configure your machine for a wireless network. See page 17.
1 Supporting IEEE 802.1x
Wireless configuration and installing the printer driver have been completed.
 Infrastructure mode
Connected to a computer with a WLAN access
point/router
or
 Ad-hoc mode See page 11
Connected to a wireless capable computer
without a WLAN access point/router
Using the
WPS/AOSS™
control panel menu
(Automatic Wireless
mode)
(Recommended)
Using the Setup
Wizard
1
from the
control panel
Using the Brother
installer
application Using the PIN
Method of Wi-Fi
Protected Setup
Using WPS/AOSS™, a USB
1
or
network cable
1
See the Quick Setup
Guide
See the Quick Setup
Guide
See page 35 See page 31
Installing drivers and software (See the Quick Setup Guide)