Changing one touch and speed dial numbers, Efault resolution. go to h – Brother MFC 7840W User Manual

Page 19

Advertising
background image

Fax operation

12

2

g

Choose one of the options below:
If you chose Color150dpi, Color300dpi, Color600dpi, Gray100dpi, Gray200dpi or
Gray300dpi in f, choose the file format (PDF or JPEG) that will be used to send your PC.

If you chose B&W200dpi (B/W200dpi) or B&W200x100 (B/W200x100) in f, choose the file format

(TIFF or PDF) that will be used to send to your PC.

Press OK.

h

Choose one of the options below:

„

To store another Speed Dial number go to b.

„

To finish storing Speed Dial numbers, press Stop/Exit.

Note

When you do a broadcast and you have saved a scan profile along with the number or E-mail address,
the scan profile of the One Touch, Speed Dial or Group number you choose first will be applied to the
broadcast.

Changing one touch and speed dial numbers

2

If you try to store a One Touch or Speed Dial number over an existing number, the LCD will show the name
or number already stored there. If your machine has a scheduled job or you have set a fax forwarding number,
the LCD will ask you if you want to change the number.

a

Do one of the following:

„

To change the stored number, press 1.

„

To exit without making a change, press 2.

#005:MIKE
1.Change 2.Exit

b

Press a or b to choose Fax/Tel, E-Mail or IFAX.

Press OK.

c

Enter a new number or character.
Press OK.

d

Press d or c to position the cursor under the character you want to change, and then press Clear/Back
to delete it. Repeat for each character you want to delete.

Advertising
This manual is related to the following products: