Brother LX-3125 - Manual (Page 30)

UTILITY STITCHES ——————————————————————————————————————————————————
29
c
Use a chalk to mark on the fabric about 5 mm
(3/16 inches) from the edge of the fabric, and
then baste it.
a Wrong side of fabric
b Right side of fabric
c Edge of fabric
d Basting stitching
e 5 mm (3/16 inches)
d
Fold back the fabric inside along the basting.
a Wrong side of fabric
b Edge of fabric
c Basting
d 5 mm (3/16 inches)
e
Unfold the edge of fabric, and position the
fabric with the wrong side facing up.
a Wrong side of fabric
b Basting
c Edge of fabric
f
Select the stretch blind stitch (8).
g
Remove the flat bed attachment and make
free-arm sewing possible.
• For details on free-arm sewing, refer
to“Using a free-arm style” (page 26).
h
Slide the part that you wish to sew onto the
arm, make sure that the fabric feeds correctly,
and then start sewing.
a Arm
<Seen from the side>
<Seen from the side>
<Seen from the side>