Brother QL-580N - Manual (Page 14)

STEP1 Getting started 8
Connect the power cord to the
QL-570/580N and then plug the
power cord into an electrical outlet.
• Check that the electrical outlet is 120V
AC before plugging the power cord.
• Unplug the power cord from the
electrical outlet after you have finished
using the QL-570/580N.
• Do not pull the power cord when
unplugging it from the electrical outlet.
The wire in the power cord may
become damaged.
• Do not connect the QL-570/580N to
the computer until directed to do so
when installing the printer driver.
!Front !Rear
2 Parts Description
Main Printing Unit
FEED
button LED
lamp ON/OFF
button CUT
button
DK Roll compartment
cover
Label tray
Power cord
USB port
Power port
Serial port
LAN port USB port
<QL-570>
<QL-580N>
Power port
Power cord
3 Connecting the Power Supply
The plug may differ by countries.