Brother MFC-885CW - Manual (Page 50)

34
5
Entering Fax mode
5
When the machine is idle, the time appears
on the LCD. When you want to send a fax, or
change fax send or receive settings, press
the (Fax) key to illuminate it in green.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
„
Fax Resolution
(See page 38.)
„
Contrast
(See page 37.)
„
Speed Dial
(See page 60.)
„
Outgoing Call
(See page 61.)
„
Caller ID hist.
(See page 61.)
„
Broadcasting
(See page 36.)
„
Delayed Fax
(See page 39.)
„
Batch TX
(See page 39.)
„
Real Time TX
(See page 38.)
„
Polled TX
(See page 86.)
„
Polling RX
(See page 85.)
„
Overseas Mode
(See page 39.)
„
Scan Size
(See page 35.)
„
Set New Default
(See page 40.)
„
Factory Reset
(See page 40.)
When the option you want is highlighted,
press OK.
Faxing from the ADF
5
a
Press (Fax).
b
Put the document face down in the ADF.
(See Using ADF on page 10)
c
Enter the fax number using the dial pad,
Speed Dial or Search.
Note
You can preview a fax message before
sending it by pressing Fax Preview. For
details, see How to preview an outgoing
fax (Black & White only) on page 77.
d
Press Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full, it will be sent in real time.
Sending a fax
5
Fax Resolution
FAX/TEL
Standard
Auto
Speed Dial
Outgoing Call
Contrast
Fax Start Press