Brother HL 3070CW - Manual (Page 94)

Internet printing for Windows ®
84
12
Note
If you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can also
enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names, you can
also enter the NetBIOS name of the print server. The NetBIOS name can be seen on the Network
Configuration page. To learn how to print the Network Configuration page, see Printing the Network
Configuration page on page 70. The NetBIOS name assigned is the first 15 characters of the node name
and by default it will appear as “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a
wireless network.
f When you click Next, Windows Vista
®
, Windows
®
7 and Windows Server
®
2008 will make a connection
with the URL that you specified.
„ If the printer driver has already been installed:
You will see the printer selection screen in the Add Printer Wizard. Click OK.
If the appropriate printer driver is already installed on your computer, Windows Vista
®
, Windows
®
7
and Windows Server
®
2008 will automatically use that driver. In this case, you will simply be asked if
you wish to make the driver the default printer, after which the Driver installation wizard will complete.
You are now ready to print.
Go to k.
„ If the printer driver has NOT been installed:
One of the benefits of the IPP printing protocol is that it establishes the model name of the printer
when you communicate with it. After successful communication you will see the model name of the
printer automatically. This means that you do not need to inform Windows Vista
®
, Windows
®
7 or
Windows Server
®
2008 about the type of printer driver to be used.
Go to g.
g
If your printer is not in the list of supported printers, click Have Disk. You will then be asked to insert the
driver disk.
h
Click Browse... and choose the appropriate Brother printer driver that is contained in the CD-ROM or in
the network share. Click Open.
For example, choose the “X:\install\your language\PCL\32
1
” folder (where X is your drive letter). Click
Open.
1 32 folder for 32-bit OS users and 64 folder for 64-bit OS users
i Click OK.
j Specify the model name of the printer. Click OK.
Note
• When the User Account Control screen appears, click Continue or Yes.
• If the printer driver that you are installing does not have a Digital Certificate you will see a warning
message. Click Install this driver software anyway to continue with the installation. The Add Printer
Wizard will then complete.