Brother HL 3070CW - Manual (Page 32)

Configuring your machine for a wireless network (For HL-3070CW)
22
3
Step by step chart for wireless network configuration
3
For Infrastructure mode
3
a Confirm your network environment. (See page 23.)
b Confirm your wireless network setup method. (See page 24.)
c Configure your machine for a wireless network. (See page 28.)
Wireless configuration and installing printer driver have been completed.
o Infrastructure mode
Connected to a computer with an access point
Using the Brother
installer application
(Recommended)
Using the
SES/WPS/AOSS control
panel menu
(if your wireless access
point supports either
SecureEasySetup,
Wi-Fi Protected Setup
or AOSS™)
Using the PIN Method of
Wi-Fi Protected Setup
(if your wireless access
point supports Wi-Fi
Protected Setup) (Windows ® )
Temporarily using a
USB cable
(Macintosh)
Temporarily using a
network cable
Configuring your machine for a wireless network
See page 29. See page 31. See page 41. See page 45.
Installing the printer driver
See the Quick Setup Guide
See the Quick Setup
Guide
(For Windows
®
)
See page 47.
(For Macintosh)
See page 51.