Brother HL-L8350CDWT - Manual (Page 101)

General Information
94
3
HP LaserJet
(Continued) Symbol Set PC-8* / PC-8 D/N / ... Sets the symbol set or the character
set.
Table Print - Prints the code table.
If Change Emulation appears on
the LCD, select Auto or HP
LaserJet in Emulation of the
Print Menu (
see page 93).
Auto LF On / Off* ON: CR
i
CR+LF, OFF: CR i CR
Auto CR On / Off* ON: LF
i
LF+CR, FF i FF+CR, or
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i VT
Auto WRAP On / Off* Chooses whether a line feed and
carriage return will happen when the
machine reaches the right margin.
Auto SKIP On* / Off Chooses whether a line feed and
carriage return will happen when the
carriage position reaches the bottom
margin.
Left Margin ## Sets the left margin at column 0 to 70
columns at 1 cpi. The default setting
is 0 cpi.
Right Margin ## Sets the right margin at column 10 to
80 columns at 1 cpi. The default
setting is 80 cpi (Letter).
Top Margin #.## Sets the top margin at a distance
from the top edge of the paper: 0.00,
0.33, 0.50, 1.00, 1.50 or 2.00 inches.
The default setting is 0.50 inches.
Bottom Margin #.## Sets the bottom margin at a distance
from the bottom edge of the paper:
0.00, 0.33, 0.50, 1.00, 1.50 or
2.00 inches. The default setting is
0.50 inches.
Lines ### Sets the number of lines on each
page from 5 to 128 lines. The default
setting is 60 lines (Letter).
Print Menu (continued)
Submenu Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.