Brother HL 2270DW - Manual (Page 32)

Other Information
32
Printer LED Indications
1 The LED will blink ON and OFF at 1 second intervals.
2 The LED will blink ON and OFF at 0.5 second intervals.
3 The yellow LED will blink in a pattern of ON for 2 seconds and then OFF for 3 seconds.
4 You can change the toner setting to the continue mode. Press Go seven times (all the LED flashes twice, and then the Ready LED is on).
The machine continues printing until the LED indicates the toner ended message.
Blinking: or or ON: or or OFF:
Printer LED OFF SLEEP
DEEP SLEEP
WARMING UP
COOLING DOWN 1
READY RECEIVING DATA
DATA REMAINING 2
Toner
Drum
Error
Ready
Dimmed
Printer LED TONER LOW 3 REPLACE
TONER 4
TONER ENDED DRUM END
SOON 3
REPLACE
DRUM
Toner
Drum
Error
Ready
User's Guide
Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4
Printer LED COVER OPEN
PAPER JAM 2
NO PAPER DRUM ERROR 2 DRUM STOP Service call
error 2
Toner
Drum
Error
Ready
User's Guide
Chapter 5 Chapter 5 Chapter 4 Chapter 4 Chapter 3